Oracle SQL
  • LICENSE

Category Archives: CBO

CBO and Partial indexing

Posted on November 2, 2022 by Sayan Malakshinov Posted in bug, CBO, oracle, query optimizing, SQL, trace, troubleshooting Leave a comment

Oracle 12c introduced Partial indexing, which works well for simple partitioned tables with literals. However, it has several significant issues:

Continue reading→
cbo oracle partial indexes partial indexing query optimization troubleshooting undocumented oracle

Slow index access “COL=:N” where :N is NULL

Posted on October 31, 2022 by Sayan Malakshinov Posted in CBO, curious, Funny, oracle, query optimizing, SQL, troubleshooting Leave a comment

All Oracle specialists know that a predicate X=NULL can never be true and we should use “X is NULL” in such cases. The Oracle optimizer knows about that, so if we create a table like this:

Continue reading→
cbo oracle query optimization troubleshooting

Smart Scan and Recursive queries

Posted on March 5, 2020 by Roger MacNicol Posted in adaptive serial direct path reads, CBO, hints, oracle, parallel, SmartScan, trace, troubleshooting Leave a comment

Since Christmas I have been asked to investigate two different “failures to use Smart Scan”. It turns out they both fell into the same little known restriction on the use of Direct Read. Smart Scan critically depends on Direct Read in order to read the synthetic output blocks into private buffers in PGA so with Direct Read disabled Smart Scan is also disabled. In these two cases the restriction is on using Direct Read on Serial Recursive queries.

Case 1: Materialized View Refresh

A customer asked me to investigate why his MView refresh was running slowly and was failing to use Smart Scan. He had used 'trace[NSMTIO] disk=highest' which showed the cause as:

Direct Read for serial qry: disabled(::recursive_call::kctfsage:::)
Continue reading→
direct path reads hints oracle Roger MacNicol SmartScan troubleshooting

Just short note for myself: OJPPD limitations

Posted on December 2, 2019 by Sayan Malakshinov Posted in CBO, collect, oracle, SQL, troubleshooting Leave a comment

As of Oracle 19c OJPPD doesn’t support connect-by and TABLE():

OJPPD: OJPPD bypassed: query block contains START WITH/CONNECT BY.
OJPPD: OJPPD bypassed: View contains TABLE expression.
cbo JPPD ojppd

Laterals: is (+) documented for laterals?

Posted on July 9, 2019 by Sayan Malakshinov Posted in bug, CBO, documentation, oracle Leave a comment

I know this syntax for a long time, since when lateral() was not documented yet, but recently I found a bug: the following query successfully returns 1 row:

with a as (select level a from dual connect by level<10)
    ,b as (select 0 b from dual)
    ,c as (select 0 c from dual)
select
  *
from a,
     lateral(select * from b where a.a=b.b)(+) bb
     --left outer join c on c.c=bb.b
where a=1;

         A          B
---------- ----------
         1

But doesn’t if we uncomment “left join”:

with a as (select level a from dual connect by level<10)
    ,b as (select 0 b from dual)
    ,c as (select 0 c from dual)
select
  *
from a,
     lateral(select * from b where a.a=b.b)(+) bb
     left outer join c on c.c=bb.b
where a=1;

no rows selected

And outer apply works fine:

with a as (select level a from dual connect by level<10)
    ,b as (select 0 b from dual)
    ,c as (select 0 c from dual)
select
  *
from a
     outer apply (select * from b where a.a=b.b) bb
     left outer join c on c.c=bb.b
where a=1;

         A          B          C
---------- ---------- ----------
         1

oracle oracle undocumented behaviour sql undocumented oracle

Workarounds for JPPD with view and table(kokbf$), xmltable or json_table functions

Posted on May 30, 2019 by Sayan Malakshinov Posted in CBO, oracle, query optimizing, SQL, troubleshooting Leave a comment

You may know that table() (kokbf$ collection functions), xmltable and json_table functions block Join-Predicate PushDown(JPPD).

Simple example:

DDL

create table xtest(a, b, c) as
select mod(level,1000),level,rpad('x',100,'x')
from dual
connect by level<=1e4
/
create index itest on xtest(a)
/
create or replace view vtest as
select a,count(b) cnt
from xtest
group by a
/
call dbms_stats.gather_table_stats(user,'xtest');
/

[collapse]

select distinct v.* 
from table(sys.odcinumberlist(1,2,3)) c, vtest v
where v.a = c.column_value;

Plan hash value: 699667151

-------------------------------------------------------------------------------------------------
| Id  | Operation                               | Name  | Rows  | Bytes | Cost (%CPU)| Time     |
-------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT                        |       |     1 |    19 |    80   (4)| 00:00:01 |
|   1 |  HASH UNIQUE                            |       |     1 |    19 |    80   (4)| 00:00:01 |
|*  2 |   HASH JOIN                             |       |     1 |    19 |    79   (3)| 00:00:01 |
|   3 |    COLLECTION ITERATOR CONSTRUCTOR FETCH|       |     1 |     2 |    29   (0)| 00:00:01 |
|   4 |    VIEW                                 | VTEST |  1000 | 17000 |    49   (3)| 00:00:01 |
|   5 |     HASH GROUP BY                       |       |  1000 |  8000 |    49   (3)| 00:00:01 |
|   6 |      TABLE ACCESS FULL                  | XTEST | 10000 | 80000 |    48   (0)| 00:00:01 |
-------------------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------

   2 - access("V"."A"=VALUE(KOKBF$))

same for json_table

select/*+ cardinality(c 1) use_nl(v) push_pred(v) */ * 
from json_table('{"a":[1,2,3]}', '$.a[*]' COLUMNS (a int PATH '$')) c
    ,vtest v
where c.a = v.a;

Plan hash value: 664523328

--------------------------------------------------------------------------------
| Id  | Operation              | Name  | Rows  | Bytes | Cost (%CPU)| Time     |
--------------------------------------------------------------------------------
|   0 | SELECT STATEMENT       |       |     1 |    28 |    78   (2)| 00:00:01 |
|   1 |  NESTED LOOPS          |       |     1 |    28 |    78   (2)| 00:00:01 |
|   2 |   JSONTABLE EVALUATION |       |       |       |            |          |
|*  3 |   VIEW                 | VTEST |     1 |    26 |    49   (3)| 00:00:01 |
|   4 |    SORT GROUP BY       |       |  1000 |  8000 |    49   (3)| 00:00:01 |
|   5 |     TABLE ACCESS FULL  | XTEST | 10000 | 80000 |    48   (0)| 00:00:01 |
--------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------

   3 - filter("V"."A"="P"."A")

Hint Report (identified by operation id / Query Block Name / Object Alias):
Total hints for statement: 1 (U - Unused (1))
---------------------------------------------------------------------------

   1 -  SEL$F534CA49 / V@SEL$1
         U -  push_pred(v)

[collapse]
same for xmltable

select/*+ leading(c v) cardinality(c 1) use_nl(v) push_pred(v) */ v.*
from  xmltable('(1,3)' columns a int path '.') c,vtest v
where  c.a = v.a(+);

Plan hash value: 564839666

------------------------------------------------------------------------------------------------------------
| Id  | Operation                          | Name                  | Rows  | Bytes | Cost (%CPU)| Time     |
------------------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT                   |                       |     1 |    28 |    78   (2)| 00:00:01 |
|   1 |  NESTED LOOPS OUTER                |                       |     1 |    28 |    78   (2)| 00:00:01 |
|   2 |   COLLECTION ITERATOR PICKLER FETCH| XQSEQUENCEFROMXMLTYPE |     1 |     2 |    29   (0)| 00:00:01 |
|*  3 |   VIEW                             | VTEST                 |     1 |    26 |    49   (3)| 00:00:01 |
|   4 |    SORT GROUP BY                   |                       |  1000 |  8000 |    49   (3)| 00:00:01 |
|   5 |     TABLE ACCESS FULL              | XTEST                 | 10000 | 80000 |    48   (0)| 00:00:01 |
------------------------------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------

   3 - filter("V"."A"(+)=CAST(TO_NUMBER(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(VALUE(KOKBF$),0,0,54525952,0),
              50,1,2)) AS int ))

Hint Report (identified by operation id / Query Block Name / Object Alias):
Total hints for statement: 1 (U - Unused (1))
---------------------------------------------------------------------------

   1 -  SEL$6722A2F6 / V@SEL$1
         U -  push_pred(v)

[collapse]

And compare with this:

create global temporary table temp_collection(a number);

insert into temp_collection select * from table(sys.odcinumberlist(1,2,3));

select/*+ cardinality(c 1) no_merge(v) */
   distinct v.* 
from temp_collection c, vtest v
where v.a = c.a;

Plan hash value: 3561835411

------------------------------------------------------------------------------------------------------------
| Id  | Operation                                | Name            | Rows  | Bytes | Cost (%CPU)| Time     |
------------------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT                         |                 |     1 |    26 |    41   (3)| 00:00:01 |
|   1 |  HASH UNIQUE                             |                 |     1 |    26 |    41   (3)| 00:00:01 |
|   2 |   NESTED LOOPS                           |                 |     1 |    26 |    40   (0)| 00:00:01 |
|   3 |    TABLE ACCESS FULL                     | TEMP_COLLECTION |     1 |    13 |    29   (0)| 00:00:01 |
|   4 |    VIEW PUSHED PREDICATE                 | VTEST           |     1 |    13 |    11   (0)| 00:00:01 |
|*  5 |     FILTER                               |                 |       |       |            |          |
|   6 |      SORT AGGREGATE                      |                 |     1 |     8 |            |          |
|   7 |       TABLE ACCESS BY INDEX ROWID BATCHED| XTEST           |    10 |    80 |    11   (0)| 00:00:01 |
|*  8 |        INDEX RANGE SCAN                  | ITEST           |    10 |       |     1   (0)| 00:00:01 |
------------------------------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------

   5 - filter(COUNT(*)>0)
   8 - access("A"="C"."A")

You can see that JPPD works fine in case of global temporary tables and, obviously, the first workaround is to avoid such functions with complex views.
But in such simple queries you have 2 other simple options:
1. you can avoid JPPD and get optimal plans using CVM(complex view merge) by just simply rewriting the query using IN or EXISTS:

select * 
from vtest v
where v.a in (select/*+ cardinality(c 1) */ c.* from table(sys.odcinumberlist(1,2,3)) c);

Plan hash value: 1474391442

---------------------------------------------------------------------------------------------------
| Id  | Operation                                 | Name  | Rows  | Bytes | Cost (%CPU)| Time     |
---------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT                          |       |    10 |   100 |    42   (5)| 00:00:01 |
|   1 |  SORT GROUP BY NOSORT                     |       |    10 |   100 |    42   (5)| 00:00:01 |
|   2 |   NESTED LOOPS                            |       |    10 |   100 |    41   (3)| 00:00:01 |
|   3 |    NESTED LOOPS                           |       |    10 |   100 |    41   (3)| 00:00:01 |
|   4 |     SORT UNIQUE                           |       |     1 |     2 |    29   (0)| 00:00:01 |
|   5 |      COLLECTION ITERATOR CONSTRUCTOR FETCH|       |     1 |     2 |    29   (0)| 00:00:01 |
|*  6 |     INDEX RANGE SCAN                      | ITEST |    10 |       |     1   (0)| 00:00:01 |
|   7 |    TABLE ACCESS BY INDEX ROWID            | XTEST |    10 |    80 |    11   (0)| 00:00:01 |
---------------------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------

   6 - access("A"=VALUE(KOKBF$))

the same with json_table and xmltable

select * 
from vtest t
where t.a in (select/*+ cardinality(v 1) */ v.a from json_table('{"a":[1,2,3]}', '$.a[*]' COLUMNS (a int PATH '$')) v);

Plan hash value: 2910004067

---------------------------------------------------------------------------------------
| Id  | Operation                     | Name  | Rows  | Bytes | Cost (%CPU)| Time     |
---------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT              |       |    10 |   100 |    42   (5)| 00:00:01 |
|   1 |  SORT GROUP BY NOSORT         |       |    10 |   100 |    42   (5)| 00:00:01 |
|   2 |   NESTED LOOPS                |       |    10 |   100 |    41   (3)| 00:00:01 |
|   3 |    NESTED LOOPS               |       |    10 |   100 |    41   (3)| 00:00:01 |
|   4 |     SORT UNIQUE               |       |       |       |            |          |
|   5 |      JSONTABLE EVALUATION     |       |       |       |            |          |
|*  6 |     INDEX RANGE SCAN          | ITEST |    10 |       |     1   (0)| 00:00:01 |
|   7 |    TABLE ACCESS BY INDEX ROWID| XTEST |    10 |    80 |    11   (0)| 00:00:01 |
---------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------

   6 - access("A"="P"."A")

select v.*
from  vtest v
where exists(select/*+ cardinality(c 1) */ 1 from xmltable('(1,3)' columns a int path '.') c where c.a = v.a);

Plan hash value: 1646016183

---------------------------------------------------------------------------------------------------------------
| Id  | Operation                             | Name                  | Rows  | Bytes | Cost (%CPU)| Time     |
---------------------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT                      |                       |    10 |   100 |    42   (5)| 00:00:01 |
|   1 |  SORT GROUP BY NOSORT                 |                       |    10 |   100 |    42   (5)| 00:00:01 |
|   2 |   NESTED LOOPS                        |                       |    10 |   100 |    41   (3)| 00:00:01 |
|   3 |    NESTED LOOPS                       |                       |    10 |   100 |    41   (3)| 00:00:01 |
|   4 |     SORT UNIQUE                       |                       |     1 |     2 |    29   (0)| 00:00:01 |
|   5 |      COLLECTION ITERATOR PICKLER FETCH| XQSEQUENCEFROMXMLTYPE |     1 |     2 |    29   (0)| 00:00:01 |
|*  6 |     INDEX RANGE SCAN                  | ITEST                 |    10 |       |     1   (0)| 00:00:01 |
|   7 |    TABLE ACCESS BY INDEX ROWID        | XTEST                 |    10 |    80 |    11   (0)| 00:00:01 |
---------------------------------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------

   6 - access("A"=CAST(TO_NUMBER(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(VALUE(KOKBF$),0,0,54525952,0),50,1,2)) AS int ))

[collapse]

2. Avoid JPPD using lateral():

select/*+ cardinality(c 1) no_merge(lat) */
   distinct lat.* 
from table(sys.odcinumberlist(1,2,3)) c, 
     lateral(select * from vtest v where v.a = c.column_value) lat;

Plan hash value: 18036714

-----------------------------------------------------------------------------------------------------------
| Id  | Operation                               | Name            | Rows  | Bytes | Cost (%CPU)| Time     |
-----------------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT                        |                 |    10 |   190 |    41   (3)| 00:00:01 |
|   1 |  HASH UNIQUE                            |                 |    10 |   190 |    41   (3)| 00:00:01 |
|   2 |   NESTED LOOPS                          |                 |    10 |   190 |    40   (0)| 00:00:01 |
|   3 |    COLLECTION ITERATOR CONSTRUCTOR FETCH|                 |     1 |     2 |    29   (0)| 00:00:01 |
|   4 |    VIEW                                 | VW_LAT_4DB60E85 |    10 |   170 |    11   (0)| 00:00:01 |
|   5 |     SORT GROUP BY                       |                 |    10 |    80 |    11   (0)| 00:00:01 |
|   6 |      TABLE ACCESS BY INDEX ROWID BATCHED| XTEST           |    10 |    80 |    11   (0)| 00:00:01 |
|*  7 |       INDEX RANGE SCAN                  | ITEST           |    10 |       |     1   (0)| 00:00:01 |
-----------------------------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------

   7 - access("A"=VALUE(KOKBF$))

Let’s see a bit more complex query:

Test tables 2

create table xtest1(id primary key, a) as
  select level,level from dual connect by level<=1000;

create table xtest2(a, b, c) as
   select mod(level,1000),level,rpad('x',100,'x')
   from dual
   connect by level<=1e4
/
create index itest2 on xtest2(a)
/
create or replace view vtest2 as
select a,count(b) cnt
from xtest2
group by a
/

[collapse]

select v.* 
from xtest1 t1,
     vtest2 v
where t1.id in (select/*+ cardinality(c 1) */ * from table(sys.odcinumberlist(1,2,3)) c)
  and v.a = t1.a;

Plan hash value: 4293766070

-----------------------------------------------------------------------------------------------------------
| Id  | Operation                                  | Name         | Rows  | Bytes | Cost (%CPU)| Time     |
-----------------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT                           |              |     1 |    36 |    80   (3)| 00:00:01 |
|*  1 |  HASH JOIN                                 |              |     1 |    36 |    80   (3)| 00:00:01 |
|   2 |   JOIN FILTER CREATE                       | :BF0000      |     1 |    10 |    31   (4)| 00:00:01 |
|   3 |    NESTED LOOPS                            |              |     1 |    10 |    31   (4)| 00:00:01 |
|   4 |     NESTED LOOPS                           |              |     1 |    10 |    31   (4)| 00:00:01 |
|   5 |      SORT UNIQUE                           |              |     1 |     2 |    29   (0)| 00:00:01 |
|   6 |       COLLECTION ITERATOR CONSTRUCTOR FETCH|              |     1 |     2 |    29   (0)| 00:00:01 |
|*  7 |      INDEX UNIQUE SCAN                     | SYS_C0026365 |     1 |       |     0   (0)| 00:00:01 |
|   8 |     TABLE ACCESS BY INDEX ROWID            | XTEST1       |     1 |     8 |     1   (0)| 00:00:01 |
|   9 |   VIEW                                     | VTEST2       |  1000 | 26000 |    49   (3)| 00:00:01 |
|  10 |    HASH GROUP BY                           |              |  1000 |  8000 |    49   (3)| 00:00:01 |
|  11 |     JOIN FILTER USE                        | :BF0000      | 10000 | 80000 |    48   (0)| 00:00:01 |
|* 12 |      TABLE ACCESS FULL                     | XTEST2       | 10000 | 80000 |    48   (0)| 00:00:01 |
-----------------------------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------

   1 - access("V"."A"="T1"."A")
   7 - access("T1"."ID"=VALUE(KOKBF$))
  12 - filter(SYS_OP_BLOOM_FILTER(:BF0000,"A"))

As you see, CVM can’t help in this case, but we can use lateral():

select/*+ no_merge(lat) */ lat.* 
from xtest1 t1,
     lateral(select * from vtest2 v where v.a = t1.a) lat
where t1.id in (select/*+ cardinality(c 1) */ * from table(sys.odcinumberlist(1,2,3)) c);

Plan hash value: 1798023704

------------------------------------------------------------------------------------------------------------
| Id  | Operation                                | Name            | Rows  | Bytes | Cost (%CPU)| Time     |
------------------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT                         |                 |    10 |   360 |    42   (3)| 00:00:01 |
|   1 |  NESTED LOOPS                            |                 |    10 |   360 |    42   (3)| 00:00:01 |
|   2 |   NESTED LOOPS                           |                 |     1 |    10 |    31   (4)| 00:00:01 |
|   3 |    SORT UNIQUE                           |                 |     1 |     2 |    29   (0)| 00:00:01 |
|   4 |     COLLECTION ITERATOR CONSTRUCTOR FETCH|                 |     1 |     2 |    29   (0)| 00:00:01 |
|   5 |    TABLE ACCESS BY INDEX ROWID           | XTEST1          |     1 |     8 |     1   (0)| 00:00:01 |
|*  6 |     INDEX UNIQUE SCAN                    | SYS_C0026365    |     1 |       |     0   (0)| 00:00:01 |
|   7 |   VIEW                                   | VW_LAT_A18161FF |    10 |   260 |    11   (0)| 00:00:01 |
|   8 |    SORT GROUP BY                         |                 |    10 |    80 |    11   (0)| 00:00:01 |
|   9 |     TABLE ACCESS BY INDEX ROWID BATCHED  | XTEST2          |    10 |    80 |    11   (0)| 00:00:01 |
|* 10 |      INDEX RANGE SCAN                    | ITEST2          |    10 |       |     1   (0)| 00:00:01 |
------------------------------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------

   6 - access("T1"."ID"=VALUE(KOKBF$))
  10 - access("A"="T1"."A")

There is also another workaround with non-documented “precompute_subquery” hint:

select v.* 
from xtest1 t1,
     vtest2 v 
where t1.id in (select/*+ precompute_subquery */ * from table(sys.odcinumberlist(1,2,3)) c)
and v.a = t1.a;

Plan hash value: 1964829099

------------------------------------------------------------------------------------------------
| Id  | Operation                       | Name         | Rows  | Bytes | Cost (%CPU)| Time     |
------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT                |              |    30 |   480 |    37   (3)| 00:00:01 |
|   1 |  HASH GROUP BY                  |              |    30 |   480 |    37   (3)| 00:00:01 |
|   2 |   NESTED LOOPS                  |              |    30 |   480 |    36   (0)| 00:00:01 |
|   3 |    NESTED LOOPS                 |              |    30 |   480 |    36   (0)| 00:00:01 |
|   4 |     INLIST ITERATOR             |              |       |       |            |          |
|   5 |      TABLE ACCESS BY INDEX ROWID| XTEST1       |     3 |    24 |     3   (0)| 00:00:01 |
|*  6 |       INDEX UNIQUE SCAN         | SYS_C0026365 |     3 |       |     2   (0)| 00:00:01 |
|*  7 |     INDEX RANGE SCAN            | ITEST2       |    10 |       |     1   (0)| 00:00:01 |
|   8 |    TABLE ACCESS BY INDEX ROWID  | XTEST2       |    10 |    80 |    11   (0)| 00:00:01 |
------------------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------

   6 - access("T1"."ID"=1 OR "T1"."ID"=2 OR "T1"."ID"=3)
   7 - access("A"="T1"."A")

It can help even in most difficult cases, for example if you can’t rewrite query (in this case you can create sql patch or sql profile with “precompute_subquery”), but I wouldn’t suggest it since “precompute_subquery” is non-documented, it can be used only with simple collections and has limitation in 1000 values.
I’d suggest to use the workaround with lateral, since it’s most reliable and very simple.

cbo CVM JPPD kokbf$ oracle undocumented behaviour pipelined functions precompute_subquery query optimization troubleshooting undocumented oracle

v$sql_hint.target_level

Posted on May 28, 2019 by Sayan Malakshinov Posted in CBO, oracle, SQL, undocumented Leave a comment

Today I wanted to give a link to the description of v$sql_hint.target_level to show that no_parallel can be specified for statement or object, and though it’s pretty obvious, but surprisingly I haven’t found any articles or posts about it, so this short post describes it.
v$sql_hint.target_level is a bitset, where
1st bit set to 1 means that the hint can be specified on statement level,
2nd – on query block level,
3rd – on object level,
4th – on join level(for multiple objects).
Short example:

   select name,sql_feature
          ,class,inverse
          ,version,version_outline
          ,target_level
         ,decode(bitand(target_level,1),0,'no','yes') Statement_level
         ,decode(bitand(target_level,2),0,'no','yes') Query_block_level
         ,decode(bitand(target_level,4),0,'no','yes') Object_level
         ,decode(bitand(target_level,8),0,'no','yes') Join_level
   from v$sql_hint h;
with hints as (
   select name,sql_feature
          ,class,inverse
          ,version,version_outline
          ,target_level
         ,decode(bitand(target_level,1),0,'no','yes') Statement_level
         ,decode(bitand(target_level,2),0,'no','yes') Query_block_level
         ,decode(bitand(target_level,4),0,'no','yes') Object_level
         ,decode(bitand(target_level,8),0,'no','yes') Join_level
   from v$sql_hint h
)
select *
from hints
where statement_level='yes'
  and to_number(regexp_substr(version,'^\d+')) >= 18
order by version;

Result:

NAME              SQL_FEATURE     CLASS                VERSION  TARGET_LEVEL STATEMENT_LEVEL QUERY_BLOCK_LEVEL OBJECT_LEVEL JOIN_LEVEL
----------------- --------------- -------------------- -------- ------------ --------------- ----------------- ------------ ----------
PDB_LOCAL_ONLY    QKSFM_DML       PDB_LOCAL_ONLY       18.1.0              1 yes             no                no           no
SUPPRESS_LOAD     QKSFM_DDL       SUPPRESS_LOAD        18.1.0              1 yes             no                no           no
SYSTEM_STATS      QKSFM_ALL       SYSTEM_STATS         18.1.0              1 yes             no                no           no
MEMOPTIMIZE_WRITE QKSFM_EXECUTION MEMOPTIMIZE_WRITE    18.1.0              1 yes             no                no           no
SKIP_PROXY        QKSFM_ALL       SKIP_PROXY           18.1.0              1 yes             no                no           no
CURRENT_INSTANCE  QKSFM_ALL       CURRENT_INSTANCE     18.1.0              1 yes             no                no           no
JSON_LENGTH       QKSFM_EXECUTION JSON_LENGTH          19.1.0              1 yes             no                no           no
QUARANTINE        QKSFM_EXECUTION QUARANTINE           19.1.0              1 yes             no                no           no
cbo hints oracle query optimization undocumented oracle

Correct syntax for the table_stats hint

Posted on April 16, 2019 by Roger MacNicol Posted in adaptive serial direct path reads, CBO, hints, oracle, SmartScan, trace, troubleshooting, undocumented 1 Comment

A friend contacted me to ask why they were having problems using the table_stats hint to influence optimizer decision making and also to influence the decision to use direct read or buffer cache scan so this is just a quick blog post to clarify the syntax as it is not well documented.

table_stats(<table_name> <method> {<keyword>=<value>} )

Method is one of: DEFAULT, SET, SCALE, SAMPLE

Keyword is one of: BLOCKS, ROWS, ROW_LENGTH
Continue reading→
oracle query optimization Roger MacNicol SmartScan troubleshooting

Another bug with lateral

Posted on February 16, 2019 by Sayan Malakshinov Posted in 12c, bug, CBO, curious, oracle, troubleshooting Leave a comment

Compare the results of the following query with the clause “fetch first 2 rows only”

with 
 t1(a) as (select * from table(odcinumberlist(1,3)))
,t2(a,b) as (select * from table(ku$_objnumpairlist(
                                 sys.ku$_objnumpair(1,1),
                                 sys.ku$_objnumpair(1,2),
                                 sys.ku$_objnumpair(1,3),
                                 sys.ku$_objnumpair(3,1),
                                 sys.ku$_objnumpair(3,2),
                                 sys.ku$_objnumpair(3,3)
                                 )))
,t(id) as (select * from table(odcinumberlist(1,2,3,4,5,6,7)))
select
  *
from t,
     lateral(select t1.a,t2.b
             from t1,t2 
             where t1.a = t2.a 
               and t1.a = t.id
             order by t2.b
             fetch first 2 rows only
             )(+)
order by id;

        ID          A          B
---------- ---------- ----------
         1          1          1
         1          3          1
         2          1          1
         2          3          1
         3          1          1
         3          3          1
         4          1          1
         4          3          1
         5          1          1
         5          3          1
         6          1          1
         6          3          1
         7          1          1
         7          3          1

14 rows selected.

with this one (i’ve just commented out the line with “fetch-first-rows-only”:

with 
 t1(a) as (select * from table(odcinumberlist(1,3)))
,t2(a,b) as (select * from table(ku$_objnumpairlist(
                                 sys.ku$_objnumpair(1,1),
                                 sys.ku$_objnumpair(1,2),
                                 sys.ku$_objnumpair(1,3),
                                 sys.ku$_objnumpair(3,1),
                                 sys.ku$_objnumpair(3,2),
                                 sys.ku$_objnumpair(3,3)
                                 )))
,t(id) as (select * from table(odcinumberlist(1,2,3,4,5,6,7)))
select
  *
from t,
     lateral(select t1.a,t2.b
             from t1,t2 
             where t1.a = t2.a 
               and t1.a = t.id
             order by t2.b
--             fetch first 2 rows only
             )(+)
order by id;

        ID          A          B
---------- ---------- ----------
         1          1          2
         1          1          3
         1          1          1
         2
         3          3          2
         3          3          1
         3          3          3
         4
         5
         6
         7

11 rows selected.

Obviously, the first query should return less rows than second one, but we can see that it returned more rows and join predicate “and t1.a = t.id” was ignored, because A and B are not empty and “A” is not equal to t.ID.

bug cbo fetch-first-rows-only lateral

Lateral view decorrelation(VW_DCL) causes wrong results with rownum

Posted on February 16, 2019 by Sayan Malakshinov Posted in 12c, bug, CBO, oracle, query optimizing, rownum, troubleshooting 2 Comments

Everyone knows that rownum in inline views blocks many query transformations, for example pushing/pulling predicates, scalar subquery unnesting, etc, and many people use it for such purposes as a workaround to avoid unwanted transformations(or even CBO bugs).

Obviously, the main reason of that is different calculation of rownum:

If we pull the predicate “column_value = 3” from the following query to higher level

select * 
from (select * from table(odcinumberlist(1,1,1,2,2,2,3,3,3)) order by 1)
where rownum <= 2
  and column_value = 3;


COLUMN_VALUE
------------
           3
           3

we will get different results:

select * 
from (select *
      from (select * from table(odcinumberlist(1,1,1,2,2,2,3,3,3)) order by 1)
      where rownum <= 2
     )
where column_value = 3;

no rows selected

Doc ID 62340.1

[collapse]

But we recently encountered a bug with it: lateral view with ROWNUM returns wrong results in case of lateral view decorrelation.
Compare results of this query with and without no_decorrelation hint:

with 
 t1(a) as (select * from table(odcinumberlist(1,3)))
,t2(b) as (select * from table(odcinumberlist(1,1,3,3)))
,t(id) as (select * from table(odcinumberlist(1,2,3)))
select
  *
from t,
     lateral(select/*+ no_decorrelate */ rownum rn 
             from t1,t2 
             where t1.a=t2.b and t1.a = t.id
            )(+)
order by 1,2;

        ID         RN
---------- ----------
         1          1
         1          2
         2
         3          1
         3          2
with 
 t1(a) as (select * from table(odcinumberlist(1,3)))
,t2(b) as (select * from table(odcinumberlist(1,1,3,3)))
,t(id) as (select * from table(odcinumberlist(1,2,3)))
select
  *
from t,
     lateral(select rownum rn 
             from t1,t2 
             where t1.a=t2.b and t1.a = t.id
            )(+)
order by 1,2;

        ID         RN
---------- ----------
         1          1
         1          2
         2
         3          3
         3          4

Of course, we can draw conclusions even from these results: we can see that in case of decorrelation(query with hint) rownum was calculated before the join. But to be sure we can check optimizer’s trace 10053:

Final query after transformations:

******* UNPARSED QUERY IS *******
SELECT VALUE(KOKBF$2) "ID", "VW_DCL_76980902"."RN" "RN"
  FROM TABLE("ODCINUMBERLIST"(1, 2, 3)) "KOKBF$2",
       (SELECT ROWNUM "RN_0", VALUE(KOKBF$0) "ITEM_3"
          FROM TABLE("ODCINUMBERLIST"(1, 3)) "KOKBF$0",
               TABLE("ODCINUMBERLIST"(1, 1, 3, 3)) "KOKBF$1"
         WHERE VALUE(KOKBF$0) = VALUE(KOKBF$1)
        ) "VW_DCL_76980902"
 WHERE "VW_DCL_76980902"."ITEM_3"(+) = VALUE(KOKBF$2)
 ORDER BY VALUE(KOKBF$2), "VW_DCL_76980902"."RN"

*************************

[collapse]

I’ll modify it a bit just to make it more readable:
we can see that

select
  *
from t,
     lateral(select rownum rn 
             from t1,t2 
             where t1.a=t2.b and t1.a = t.id)(+)
order by 1,2;

was transformed to

select
  t.id, dcl.rn
from t,
     (select rownum rn 
      from t1,t2 
      where t1.a=t2.b) dcl
where dcl.a(+) = t.id
order by 1,2;

And it confirms that rownum was calculated on the different dataset (t1-t2 join) without join filter by table t.
I created SR with Severity 1 (SR #3-19117219271) more than a month ago, but unfortunately Oracle development doesn’t want to fix this bug and moreover they say that is not a bug. So I think this is a dangerous precedent and probably soon we will not be able to be sure in the calculation of rownum and old fixes…

bug cbo lateral query optimization troubleshooting
photo Sayan Malakshinov

Oracle ACE Pro Oracle ACE Pro

DEVVYOracle Database Developer Choice Award winner

Oracle performance tuning expert

UK / Cambridge

LinkedIn   Twitter
sayan@orasql.org

Recent Posts

  • CBO and Partial indexing
  • Slow index access “COL=:N” where :N is NULL
  • Where does the commit or rollback happen in PL/SQL code?
  • :1 and SP2-0553: Illegal variable name “1”.
  • ORA exceptions that can’t be caught by exception handler

Recent Comments

  • Oracle SGA 값을 증가 시킬 때 발생 장애 원인 – DBA의 정석 on Example of controlling “direct path reads” decision through SQL profile hints (index_stats/table_stats)
  • Oracle SQL | Oracle diagnostic events — Cheat sheet on Where does the commit or rollback happen in PL/SQL code?
  • Functions & Subqueries | Oracle Scratchpad on Deterministic function vs scalar subquery caching. Part 3
  • Materialized views state turns into compilation_error after refresh - kranar.top - Answering users questions... on Friday prank: select from join join join
  • Exadata Catalogue | Oracle Scratchpad on When bloggers get it wrong – part 1
  • Exadata Catalogue | Oracle Scratchpad on Serial Scans failing to offload
  • lateral join – decorrelation gone wrong – svenweller on Lateral view decorrelation(VW_DCL) causes wrong results with rownum
  • 255 column catalogue | Oracle Scratchpad on Intra-block row chaining optimization in 12.2
  • 255 column catalogue | Oracle Scratchpad on row pieces, 255 columns, intra-block row chaining in details
  • opt_estimate catalogue | Oracle Scratchpad on Correct syntax for the table_stats hint

Blogroll

  • Alex Fatkulin
  • Alexander Anokhin
  • Andrey Nikolaev
  • Charles Hooper
  • Christian Antognini
  • Coskan Gundogar
  • David Fitzjarrell
  • Igor Usoltsev
  • Jonathan Lewis
  • Karl Arao
  • Mark Bobak
  • Martin Bach
  • Martin Berger
  • Neil Chandler
  • Randolf Geist
  • Richard Foote
  • Riyaj Shamsudeen
  • Tanel Poder
  • Timur Akhmadeev
  • Valentin Nikotin

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org
  • 1
  • 2
  • 3
  • 4
  • Next
©Sayan Malakshinov. Oracle SQL